Frame: Milano 3V Wing TIG
Color: Red
Material: Dedacciai 18MCDV6HT
Brake type: Center-Mount rim brake
Serial: 869 83
Tire Clearance: clears 28mm in the rear, and 25mm in the front
Size: Stamped with SJ 56 under the bottom bracket. Actual measurements taken by hand are approximate and are as follows: 545mm stack, 390mm reach, 805mm standover height. 545mm actual top tube center to center. 540mm center of bottom bracket to center of top tube. 560mm center of bottom bracket to top of seat tube. Head tube 143mm. 405mm chainstay length. If other measurements or take-offs are needed, please feel free to ask. We have included in our last picture a photo of the frame with a wheelset on it to show the head and seat tube angles and top tube slope.
Condition: This frame is new and has never been built up. It has some light wear from storage, shipping, and handling. No cracks or defects were identified through a thorough visual inspection. The cosmetic imperfections to highlight include: a paint chip near the bottom bracket shown in pic #8, a paint chip on the non-driveside seatstay shown in pic #9, and a scratch on the drive side seatstay shown in pic #10 & 11. We have attempted to show all noticeable imperfections in specific close-up pictures, however other minor imperfections and light signs of use may exist.
Groupset compatibility: Frame can be setup for eTap or mechanical groupsets. This frame is not compatible with Di2, or EPS setups. Mechanical cable guide below the bottom bracket intact.
Bottom bracket: Italian threaded bottom bracket shell type. No bottom bracket is currently installed. We have a handful of lightly used basic bottom brackets on hand, let us know what you need and we can try to ship the frame with the right bottom bracket installed. Additionally, CyclingUpgrades is a Wheels Manufacturing, and a Ceramicspeed Authorized Dealer, if you prefer to have the frame setup with a certain Wheels Manufacturing, or Ceramicspeed bottom bracket we can add and install it at an additional cost before shipping - message with inquiries/requests.
Steerer length: N/A - this frame/fork uses a quill style stem.
Seatpost: 27.2mm diameter. No seatpost included
Dropout Spacing: QR x 100mm front, QR x 130mm rear.
Weight: 2442 grams as pictured with frame hardware, etc.
What's included: Frame, and fork. A plastic temporary headset was put on this frame for pictures, but is not included.
At CyclingUpgrades, we fulfill all orders next business day or sooner. Generally we are able to fulfill orders placed by 12pm MT on the same day, however it is not guaranteed. We ship all items via USPS except for frames/wheels which ship via UPS or Fedex. Please check our other listings for additional cycling upgrades and thank you for shopping our store!
