Product Description

Frame: Trek Domane Koppenberg

Color: Red

Brake type: Center-Mount rim brake.

Tire clearance: Clears 28mm actual width front and rear.

Size: 56cm. 560mm Effective Top Tube. Stack - 548mm (measured). Reach - 392mm (measured). Head tube 130mm. Fork axle to crown 380mm. We have included a picture of the frame with wheels mounted to show the geometry. Trek never actually had a specific geometry chart for the Koppenberg on their website, they just called it an H1. For the most part it is the same geometry as an Emonda H1 with a couple of minor differences as follows...

• the BB drop is a 5-7mm lower than the Emonda
• the headtube length is 10mm shorter than the Emonda but ends up at the equivalent height from the axle because the axle to crown length is 380mm vs 370mm
• Stack and reach are affected by the BB drop and headtube length changes, so we have measured those by hand as accurately as possible.

Condition: No cracks or carbon defects were identified through a thorough visual inspection. The cosmetic imperfections to highlight include: some scratches near the bottom bracket on the drive side shown in pic #5, some scratches on the down tube shown in pic #6, some scratches on the head tube shown in pic #7, some scratches on the chainstay shown in pic #8, a scratch on the top tube shown in pic #9, and some tire rub on the chainstay crown shown in pic #10. We have attempted to show all noticeable imperfections in specific close-up pictures, however other minor imperfections and light signs of use may exist.

Groupset compatibility: Frame can be setup for Di2, EPS, eTap, or mechanical groupsets. This frame was previously setup with an eTap groupset. Other frame/cable stops will be needed for Di2 or mechanical setups. Mechanical cable guide below the bottom bracket intact.

Bottom bracket: BB90 bottom bracket shell type (37mm shell diameter, 90mm shell width). Bottom bracket for GXP 24/22mm spindles currently installed and included. Alternatively, we have a handful of lightly used basic bottom brackets on hand, let us know what you need and we can try to ship the frame with the right bottom bracket installed. Additionally, CyclingUpgrades is a Wheels Manufacturing, and a Ceramicspeed Authorized Dealer, if you prefer to have the frame setup with a certain Wheels Manufacturing, or Ceramicspeed bottom bracket we can add and install it at an additional cost before shipping - message with inquiries/requests. 

Steerer length: 60mm of steerer above the top tube. No of spacers below the stem plus the headset cover. We do have an option available to safely extend the steerer tube by 15-18mm - message us for additional details.

Seatpost: Carbon seatmast cap included. Seatmast height has been trimmed to 633mm from center of bottom bracket. The minimum height to saddle rails is 675mm, and the maximum height to the saddle rails is 720mm. Add your saddle stack height to determine max saddle height from center of bottom bracket.

Dropout Spacing: QR x 100mm front, QR x 130mm rear.

Weight: 1963 grams as pictured with headset, bottom bracket, seatmast cap, frame hardware, etc. 

What's included: Frame, fork, headset, rear derailleur hanger, bottom bracket, seatmast cap

At CyclingUpgrades, we fulfill all orders next business day or sooner. Generally we are able to fulfill orders placed by 12pm MT on the same day, however it is not guaranteed. We ship all items via USPS except for frames/wheels which ship via UPS or Fedex. Please check our other listings for additional cycling upgrades and thank you for shopping our store!