Frame: 1992 Serotta 20th Anniversary Edition #14
Serial: CA 56 014
Tire clearance: 28-30mm up front, 26-28mm in the rear depending on axle placement in the rear dropout.
Material: Columbus Colorado
Color: White.
Brake type: Center-Mount rim brake.
Size: Stamped with a 56cm under the bottom bracket. Actual measurements taken by hand are approximate and are as follows: 560mm actual top tube center to center. 560mm center of bottom bracket to center of top tube. 570mm center of bottom bracket to top of seat tube. Head tube 145mm. 420mm chainstay length. If other measurements or take-offs are needed, please feel free to ask. We have included in our last picture a photo of the frame with a wheelset on it to show the head and seat tube angles and top tube slope.
Condition: This frame is in excellent condition. The prior owner put very limited miles on this frame while it was built so there are only very minor signs of road wear or use on the frame. No cracks or dents were identified through a thorough visual inspection. The cosmetic imperfections to highlight include: a scratch near the bottom bracket on the drive side shown in pic #5 (this is not chain drop and occurred during bottom bracket removal), some light scratching inside the drive side chainstay shown in pic #9, some wear on the rear dropout which has been touched up by the prior owner shown in pic #10, and a paint chip on the backside of the fork near the brake mount shown in pic #11. We have attempted to show all noticeable imperfections in specific close-up pictures, however other minor imperfections and light signs of use may exist.
Groupset compatibility: Frame can be setup for eTap or mechanical groupsets. This frame is not compatible with Di2, or EPS setups. Mechanical cable guide below the bottom bracket intact.
Bottom bracket: English threaded bottom bracket shell type. No bottom bracket currently installed. We have a handful of lightly used basic bottom brackets on hand, let us know what you need and we can try to ship the frame with the right bottom bracket installed. Additionally, CyclingUpgrades is a Wheels Manufacturing, and a Ceramicspeed Authorized Dealer, if you prefer to have the frame setup with a certain Wheels Manufacturing, or Ceramicspeed bottom bracket we can add and install it at an additional cost before shipping - message with inquiries/requests.
Steerer length: N/A - this frame/fork uses a quill style stem.
Seatpost: 27.2mm. No seatpost included.
Dropout Spacing: QR x 100mm front, QR x 130mm rear.
Weight: 2626 grams as pictured with frame hardware, etc.
What's included: Frame, and fork. A temporary plastic headset has been put on the frame for pictures, but is not included.
At CyclingUpgrades, we fulfill all orders next business day or sooner. Generally we are able to fulfill orders placed by 12pm MT on the same day, however it is not guaranteed. We ship all items via USPS except for frames/wheels which ship via UPS or Fedex. Please check our other listings for additional cycling upgrades and thank you for shopping our store!
